- How often should I test and inspect my valve?
That is dependent upon the application. Typically our valves are tested prior to shipping.
- Can I run slightly over the published pressure rating of the valve?
- Although our valves may perform well over published ratings, we cannot recommend using products outside the engineering specified pressure range.
- Can you confirm your valve will work with my fluid media?
- The valve material is generally selected by Party A or the design company according to the medium conditions, and we will review and provide suggestions. The final confirmation shall be made by Party A.
- What is the maximum allowable fluid velocity?
- It depends on many factors, including the valve design, fluid viscosity, allowable pressure drop, etc.
- What is the maximum allowable temperature of the fluid media?
- That is dependent upon the materials used. Please contact us.
- Will your valve work at a slightly lower temperature than published?
- Due to the wide range of applications and uses, we do not set a low temperature rating on or valves. It is up the customer to determine suitability in these applications.
- What valve connections are available?
- We offer a wide variety including BW, SW,RF,RTJ and NPT ends. Please contact us to discuss.
- Where can I get performance data on my valve?
- Please contact us.
